Order
Pipe Types
uPVC Pressure Pipes
uPVC Pipes (Ring Fit Type)
uPVC Casing Pipes
HDPE Pipes
PP-R Pipes
PEX Pipes
PEX Plastics Fittings
uPVC Pipes (Ring Fit type)

APPLICATION:

- Corrosion resistant pressure pipe.
- Metric series sizes 20mm to 280mm for use at use at temperatures up to and including 60° C.
- Pressure rating (2.5 Kgf/cm² to 12.5 Kgf/cm²
- Generally resistant to most acids, bases, salts, aliphatic solutions, oxidants, and halogens.
- Typical applications includes: chemical processing, plating, potable water systems, water and  Water treatment, irrigation, agricultural, and other industrial applications involving corrosive fluid transfer.

SCOPE:

Outlined specification IS, DIN. This pipe is intended for use in applications where the fluid conveyed does not exceed 60 °C.

PVC MATERIALS:

The material used in the manufacture of the pipe shall be domestically produced rigid polyvinyl chloride (PVC) compound,

PVC Resin grade K-6701 of Reliance Ind. Ltd. and 67GER01 of Indian Petrochemicals Corp. Ltd. are used in manufacture of uPVC Pipes. 

DIMENSIONS:

PVC Pressure Pipes shall be manufactured in strict accordance to the requirements of IS: 4985-2000 for physical dimensions and tolerances. Each production run of pipe manufactured in compliance to this standard, shall also meet or exceed the test requirements for materials, workmanship, reversion, hydrostatic pressure, resistance to external blows density, sulphated ash content as defined in IS: 4985-2000

All Ring fit (Elastomeric sealing ring) belled-end pipe shall have tapered sockets to create an interference-type fit, which meet or exceed the dimensional requirements and the minimum socket length for pressure-type sockets as defined in IS: 4985-2000.

Dimensions of GANGA / HIPPO Elastomeric Sealing Ring Type uPVC Pipes as per IS: 4985-2000 For use in WaterSupply[All Dimensions in mm]

Nominal Outside Diameter Nominal

Socket inner diameter

Minimum depth of engage-ment

Class I  (0.25 MPA) Individual Value

Class II   (0.4 MPA) Individual Value

Class III   (0.6 MPA) Individual Value

Class IV   (0.8 MPA) Individual Value

Class V   (1.0 MPA) Individual Value

Class VI (1.25 MPA) Individual Value

Size

Dia Meter

Max. Min.

Max.

Min.

Max.

Min.

Max.

Min.

Max.

Min.

Max.

Min.

Max.

Min.

90

90.7

+0.8 - 0.0

70

1.7

1.3

2.6

2.1

3.7

3.1

4.6

4.0

5.7

5.0

7.1

6.1

110

110.8

+0.9 - 0.0

75

2.0

1.6

3.0

2.5

4.3

3.7

5.6

4.9

7.1

6.1

8.7

7.5

125

128.9

+1.0 - 0.0

78

2.2

1.8

3.4

2.9

5.0

4.3

6.4

5.6

8.0

6.9

9.8

8.5

140

140.9

+1.0 - 0.0

81

2.4

2.0

3.8

3.2

5.5

4.8

7.3

6.3

8.9

7.7

11.0

9.5

160

161.0

+1.1 - 0.0

86

2.8

2.3

4.3

3.7

6.2

5.4

8.3

7.2

10.2

8.8

12.6

10.9

180

181.1

+1.1 - 0.0

90

3.1

2.6

4.9

4.2

7.1

6.1

9.2

8.0

11.4

9.9

14.1

12.2

200

201.2

+1.1 - 0.0

94

3.4

2.9

5.3

4.6

7.9

6.8

10.3

8.9

12.7

11.0

15.7

13.6

225

226.4

+1.1 - 0.0

100

3.9

3.3

6.0

5.2

8.8

7.6

11.5

10.0

14.3

12.4

17.6

15.3

250

251.5

+1.1 - 0.0

105

4.2

3.6

6.5

5.7

9.8

8.5

12.9

11.2

15.9

13.8

19.6

17.0
Note: Elastomeric Rubber Ring Fit pipes are also available as per ISO and DIN standard.
© All Rights Reserved Narmada Pipes