Order
Pipe Types
uPVC Pressure Pipes
uPVC Pipes (Ring Fit Type)
uPVC Casing Pipes
HDPE Pipes
PP-R Pipes
PEX Pipes
PEX Plastics Fittings
uPVC Casing Pipes

APPLICATION:

- Corrosion resistant uPVC Casing Pipes for bore-well & tube-well.
- BSP Series sizes 1½” to 10”
- Best suitable for shallow and medium bore.
- Generally resistant to most acids, bases, salts, aliphatic solutions, oxidants, and halogens.

 

SCOPE:

Outlined specification IS, DIN. This pipe is intended for use in applications where the fluid conveyed does not exceed 60 °F.

 PVC MATERIALS:

The material used in the manufacture of the pipe shall be domestically produced rigid polyvinyl chloride (PVC) compound,

PVC Resin grade K-6701 of Reliance Ind. Ltd. and 67GER01 of Indian Petrochemicals Corp. Ltd.

DIMENSIONS:

uPVC Casing Pipes shall be manufactured in strict accordance to the requirements of IS: 12818-1992 for physical dimensions and tolerances. Each production run of pipe manufactured in compliance to this standard, shall also meet or exceed the test requirements for materials, workmanship, impact strength, specific gravity, tensile strength, vicat softening temperature test content as defined in IS: 12818-1992.

Pipes thread and slott sizes which meet the dimensional requirements as defined in IS: 12818-1992.

Dimensions of uPVC Casing Pipe – CS as per IS: 12818 – 1992
(Suitable for wells depth up to 80 meters)

Size in Inch

Nominal diameter (DN)

Outer diameter of Pipe (mm)

Thickness of Pipe (mm)

Outer dia over connection

Segmental Length (mm)

Pipe length with socket (mm)

4"*

100

113.0 - 113.2

4.0 – 4.4

117

45

3.06

4.5"*

115

125.0 - 125.4

-

-

-

3.07

5"*

125

140.0 - 140.4

4.9 – 5.4

148

60

3.08

6"

150

165.0 - 165.4

5.7 – 6.5

173

60

3.08

6.5"*

165

180.0 - 180.5

5.7 – 6.5

189

60

3.08

7"

175

200.0 - 200.5

7.0 – 7.8

212

60

3.09

8"

200

225.0 - 225.5

7.6 – 8.8

238

70

3.10

9"*

225

250.0 - 250.5

8.6 – 9.8

-

-

3.11

10”

250

280.0 - 280.5

9.6 – 11.0

292

85

3.11
 
Dimensions of uPVC Casing Pipe – CM as per IS: 12818 – 1992
(Suitable for wells depth up to 250 meters)

Size in Inch

Nominal diameter (DN)

Outer diameter of Pipe (mm)

Thickness of Pipe (mm)

Outer dia over connection

Segmental Length (mm)

Pipe length with socket (mm)

1.5"

40

48.0 – 48.2

3.5 – 4.0

52

25

3.04

2"

50

60.0 - 60.2

 4.0 – 4.6

64

30

3.05

3"

80

88.0 - 88.2

4.0 – 4.6

94

40

3.06

4"

100

113.0 - 113.2

5.0 - 5.7

120

45

3.06

4.5" *

115

125.0 - 125.4

5.0 - 5.7

132

50

3.07

5"

125

140.0 - 140.4

6.5 - 7.3

150

60

3.08

6"

150

165.0 - 165.4

7.5 - 8.5

177

60

3.08

6.5"*

165

180.0 - 180.5

7.5 - 8.5

193

60

3.08

7"

175

200.0 - 200.5

8.8 - 9.8

215

60

3.09

8"

200

225.0 - 225.5

10.0 - 11.2

243

70

3.10

9"*

225

250.0 - 250.5

11.8 - 12.9

-

-

3.11

10"

250

280.0 - 280.5

12.5 - 14.0

298

85

3.11

* Not under the scope of IS: 12818-1992   
Specification for Deep Well Plain Casing Pipe Conforming as per DIN 4925

Nominal
Dia.

Outside Dia.
mm

Wall
Thickness
mm

Max. Outside Dia.
Over Socket
mm

Collapse
Resistance
kg/cm²

Inch

mm

Min.

Max.

Min.

Max.

4"

100

113.0

113.3

7.0

7.9

125

15.5

4.5"

115

125.0

125.3

7.5

8.5

137

15.5

5"

125

140.0

140.4

8.0

9.0

152

15.5

6"

150

165.0

164.5

9.5

10.7

180

15.5

7"

175

200.0

200.5

11.5

13.3

215

7.5

8"

200

225.0

225.5

13.0

14.8

247

15.5

10"

250

280.0

280.5

16.0

17.6

304

15.5

Specification for Medium Well Plain Casing Pipe Conforming as per DIN 4925

Nominal
Dia.

Outside Dia.
mm

Wall
Thickness
mm

Max. Outside Dia.
Over Socket
mm

Collapse
Resistance
kg/cm²

Inch

mm

Min.

Max.

Min.

Max.

1.5"

40

48.0

48.2

3.5

4.1

53

32.0

2"

50

60.0

60.2

4.0

4.6

66

24.0

3"

80

88.0

88.3

4.0

4.6

94

7.5

4"

100

113.0

113.3

5.0

5.7

121

7.5

4.5"

115

125.0

125.3

5.0

5.7

132

7.5

5"

125

140.0

140.4

6.5

7.4

149

7.5

6"

150

165.0

165.4

7.5

8.5

176

7.5

7"

175

200.0

200.5

8.8

9.8

215

7.5

8"

200

225.0

225.5

10.0

11.2

241

7.0

10"

250

280.0

280.5

12.5

14.0

297

7.0
 

Slot Width

Min. mm

0.2

0.3

0.5

0.75

1.0

1.5

2.0

3.0

Tolerance

 

+.06

+.08

+0.1

+0.2

+0.2

+0.2

+0.2

+0.3

Slot Width

* Inch no.

8

12

20

30

40

60

80

120

* Slot numbers designate width of openings in thousand part of an inch. no. 40 is an opening of 40/100".
Note: Tolerance for 0.3 mm slot is +0.06 mm conforming to IS:12818. Other values are same.
© All Rights Reserved Narmada Pipes